MultiMan MulitMan KalKEx+ Drinking System Cleaner Powder 100 G For 20 Liters Of Rinsing Water

MultiNox KalkEx uses silvered fruit acid to remove lime deposits, production aids and impurities in drinking water systems as the cause of biofilms and legionella growth.

Instructions for use:
Switch off boiler! First clean the system with KeimEx and disinfect with ChloroSil. Dose KalkEx, 10 g per 2 l water. The amount of water must be sufficient to fill the line and boiler.

Sprinkle into 1 – 2 watering cans filled with drinking water, stirring so that it does not clump. Pour into the empty tank. Do not add any more drinking water! Open each tap and flush the line so that the concentrated KalkEx solution reaches each line. While doing so, collect it in a container and return it to the tank. After 2 hours the lines are decalcified and without odor. Drain the system.
You can then drink the water from the system!

Practical tip:
During rest periods in summer, always fill up the drinking water system completely and add ChloroSil to protect against recontamination.